Fitment Information
-
FCST-X (or FCST)
Each of the 26 preterminated 10awg wires has a unique identification labels associated with the FCST-X labeling. However, they can still be used with the older FCST that has slightly different labeling. -
RADIUM ENGINEERING RA-SERIES FUEL CELLS
Designed specifically to mount on the perimeter of RA-Series Fuel Cells. For another fuel cell to be directly compatible, the bolt spacing must be 3.6″-5.7″ (91-145mm). The bolt hole distance of the bulkhead mount is compatible with all Radium Engineering RA-series fuel cells. It can be mounted anywhere along the perimeter of the fuel cell. Furthermore, the mount can be rotated inwards or outwards for a 3in (76mm) location difference.
How Assembly Works
- Install the labeled ring terminal wires to the FCST-X studs.
- Install the mount using the fuel cell hardware.
- Assemble the bulkhead connector to the mount.
- Cut and crimp the contacts to the wires
- Install the contacts into the connector.
- Install the plug seals into all open cavities.
- Assemble and populate the chassis harness.
What is Needed
- For the stamped contacts, an open barrel style crimper is required.
- Although contacts are provided for the connector, wiring is not included for the chassis harness.
- Although not required, wire loom (expandable sleeving, adhesive cloth tape, etc.) is not included.
What Include’s
- Anodized aluminum fuel cell mounting bracket
- Environmentally sealed female CPC bulkhead connector
- Environmentally sealed male CPC connector
- Stamped 14-10awg open barrel female contacts (x16)
- Stamped 14-10awg open barrel male contacts (x16)
- Black rubber boot, straight
- Black rubber boot, right angle
- Bulkhead panel hex nut
- Bulkhead locking wave washer
- Plugs for empty cavities (x25)
- Cable zip-ties (x5)
- Labeled 10awg wire with preterminated ring terminals (x26)
Product Description
The fuel cell subharness kit is a great addition for quicker pit stops. It is common for racers to have a spare drop-in FCST-X fuel pump module in the pit in case there is an issue with a fuel pump, electrical wiring, etc. With a subharness on both FCST-X units, the entire pump assembly can be swapped quicly without any tools.
